A furnace cannot last or function without a proper blower motor. The blower motor is the furnace component located inside the furnace air handler that sends the heated air throughout the air duct system and out the vents of your house.
If your furnace blower motor becomes faulty, your furnace will not meet your desired temperature set on the thermostat. Without the blower motor, the furnace will be unable to transfer its heated air into your house.
So, how do you know that your furnace blower motor is faulty? One of the most common ways to tell is if your HVAC system fails to blow hot or cold air into the room. And this situation is a result of your blower motor failing to blow the warm air through the vents into the house. Check out the Anderson Air website if you’d like to learn more about how to check a furnace blower and other parts of your HVAC system.
Also, if you hear a vibrating sound in the walls, you can know for sure if you contact a trusted HVAC technician.
When furnace blower motors get damaged, the best choice is to replace them. But how much is the furnace blower motor replacement?
Here’s a breakdown of the average cost of furnace blower replacement.
What Does a Furnace Blower Motor Replacement Involve?
Furnace blower motor replacement comprises purchasing a new furnace blower motor and the manpower.
On average, the overall cost of replacing a furnace blower motor is about $100 to $2,000. This applies if you are replacing the entire furnace system, say, the fan, motor, and housing.
But if you are only replacing the furnace blower motor, then the cost comes down much lower.
What is the Cost of Furnace Blower Motors By Brand?
Blower motor prices vary depending on the brand. Every brand of furnace blower motors commands different prices. And the type or brand of blower motor you buy depends on the brand of your existing furnace system.
Below is a list of the average costs of popular furnace blower motor brands:
- Goodman costs about $75 to $800
- Rheem costs about $250 to $900
- Lennox costs about $150 to $1,500
- Trane costs about $175 to $1,500
- Carrier costs about $100 to $1,600
- York costs about $150 to $1,800
Cost for Other Furnace Blower Motor Parts That Should Be Considered
Sometimes, individual or specific components in the blower motor become faulty and need replacement. And suppose this is the case, it will be much cheaper for you to replace and rectify the problem.
Here is the average cost of each furnace blower motor component:
- The blower belt costs between $20 to $150
- The bearing costs between $5 to $100
- The squirrel cage (blower wheel) costs between $50 to $275
- The housing costs between $100 to $300
- The capacitor costs between $150 to $450
- The pulley costs between $50 to $250
- The shaft costs between $50 to $200
How Much Does Labor To Replace A Furnace Blower Motor Cost?
It costs about $150 to $250 to install a new furnace blower motor. But a big percentage of this price caters to labor costs.
Different HVAC technicians charge different prices for replacing furnace blower motors. But most charge between $75 and $125 an hour. And given that a furnace blower motor replacement takes 90 to 150 minutes, you find that you will spend about $112 to $188 (at $75 per hour) and $187 to $312 (at $125 per hour).
Cost To Replace Your Furnace Blower Motor Yourself
Without the labor costs, furnace blower motor replacement becomes much cheaper. Your only cost is to buy the furnace blower motor compartment and follow the DIY guide for installing it.
But although DIY furnace blower motor installation is cheaper, it is more likely to cost you in the long run. For instance, suppose you buy and install your blower motor, and after turning on your furnace again, discover it is not working. This could mean that you diagnosed the wrong issue. And if this occurs, then you wasted money on purchasing a new motor.
For this reason, it is best to leave all furnace maintenance checks, diagnoses, and repairs to qualified HVAC professionals. They know what to check for and how to do it. And their quality work saves you money in the long run.
Most HVAC professionals charge about $50 to $150 as a diagnostic fee to determine what is wrong with your face. The great thing is that they usually lower these fees if you contract them to repair or replace your faulty furnace blower motor.
How Can You Lower Your Furnace Blower Motor Replacement Cost?
Regardless of the different prices above, these prices change depending on a few factors such as:
Warranty
If your furnace or entire HVAC system still has an operating warranty, your costs will be halved. Most HVAC stem warranty covers premature failure of your furnace blower motor. So, the manufacturer gives you a brand new furnace blower motor. The only cost you will incur is labor, which is about $150 or less.
Furnace blower motor replacement cost according to type
Blower type is according to speed. There are three types of furnace motors; single-speed, multi-speed, and variable-speed blower motors.
Single-speed furnace blower motors are cheaper than their counterparts. It can cost you about $450 to replace your single-speed blower motor. On the other hand, you will have to spend about $600 and more to replace a multi-speed and variable-speed blower motor.
Location of your furnace system
An HVAC technician will likely charge you more to replace a blower motor in a hard-to-reach area. You will pay less for labor if your furnace is in the basement. If your furnace is in a hard-to-reach place, your specialist could charge you an extra fee.
Conclusion
Blower motors are essential in enjoying your desired temperatures. Call a professional HVAC technician for the right diagnosis, safe replacement furnace blower motor, and long-lasting solution for any furnace blower motor issues and replacement.
Best of luck!
